Maximum diameters and wall thicknesses can vary according to the resistance shown by the material to forming.
For greater sizes of diameters and thicknesses, we request you to contact us.
Heat treatments could be applied to all dished ends, produced in any method, appropriate to the material used (max.1200°C).

MANUFACTURING METHODS AND CAPACITY

For KBS dished end manufacturing, there can be production with 4 different types of forming. Cold forming, Cold/Hot pressing with deep drawing, semi-hot spinning, Hot forming.

As Diameter, we can produce in one piece up between 21.4 mm- 8000 mm. Above 8000 mm segmental forming performs.
Between 3 mm-70 mm width in cold forming,
Between 0,5 mm-100 mm thickness in cold/hot pressing in deep drawing
Between 70-100 mm width in half cold/hot forming,
Between 0 mm-100 mm thickness in hot forming.